PalletPal® Mechanical Level Loader (Fully Automatic)
This fully automatic, spring-actuated model is easy to use and ideal for most applications. It incorporates a turntable to allow nearside loading and a system of springs and shock absorbers which lower and raise the unit as pallets are built up and broken down, to maintain a constant working height. No power or air supply is required. Pallet loads up to 4,500 lbs can be handled.
- Rugged tubular steel frame for loads up to 4500 lbs.
- Heavy-duty springs calibrated to bring pallet to most convenient loading and unloading height.
- Proven linkage design maintains level under uneven loading.
- Dampener provides smooth, gradual raising and lowering action, without overshoot or spring bounce.
- Low-friction bearing supported turntable for near-side loading and unloading.
- Phenolic frame cover (optional).
- Fork pockets for relocation by fork truck also extend base for free standing stability.
- Leveling feet (optional) allow use on sloping or uneven floors.
- Free standing, can be easily relocated by fork truck.
| Capacity | Lowered Height | Raised Height | Approx. Shipping Weight |
| 400 to 4,500 lbs | 9.5″ | 28″ | 460 lbs |
PalletPal® Pneumatic Actuated Level Loader (Fully Automatic)
Designed for use where pallet load weights vary widely and change frequently. The airbag spring combination provides virtually linear response, and the spring provides a measure of safety by supporting the unloaded turntable in the event of accidental air loss from the airbag. Fittings and tubing are simple with only two connections. The unit is equipped with fork pockets for easy relocation and to provide a stable base that does not require lagging.
- Fully guarded, easily accessible air outlet and gauge
- Air bag fully protected in down position
- Wide base for free standing stability
- Fork pockets for relocation by fork truck
- Rugged lift table type frame for loads up to 4,500 lbs
- Low-friction, bearing supported turntable for near-side loading and unloading
| Capacity | Lowered Height | Raised Height | Approx. Shipping Weight |
| 400 to 4,500 lbs | 9.5″ | 30.5″ | 615 lbs |
PalletPal® Powered-Hydraulic Level Loader
When loads, weights, pallet sizes or product dimension vary greatly, a Powered PalletPal with total operator control is the solution. A foot control allows the operator to adjust the load to an infinite number of positions up to 32 3/4″ (plus pallet height), so it’s always at the most comfortable working height. The manual turntable top allows easy rotation of the load so that the operator is always working on the near side. Available in 2,000 and 4,000 pound capacities.
- Low-friction bearing supported turntable
- Fork pockets for easy relocation
- 115 volt power for use anywhere in the plant
- Wide base for exceptional free standing stability
| Model | Capacity | Turntable | Lowered Height | Raised Height | Power | Approx. Shipping Weight |
| SW-PPH2-24 | 2,000 lbs | 43 5/8 dia. | 8 ¾” | 32 ¾” | 115/1/60 | 700 lbs |
| SW-PPH4-24 | 4,000 lbs | 43 5/8 dia. | 8 ¾” | 32 ¾” | 115/1/60 | 760 lbs |
PalletPal® Powered-Pneumatic Level Loader
When loads, weights, pallet sizes or product dimension vary greatly, a Powered PalletPal with total operator control is the solution. A heavy duty airbag positions loads up to 4000 pounds with as little as 80 psi. A foot valve allows the operator to adjust the load to any position up to 33 1/2″ (plus pallet height), so it’s always at the most comfortable working height. The manual turntable top allows easy rotation of the load so that the operator is always working on the near side. Available in 2,000 and 4,000 pound capacities.
- Low-friction bearing supported turntable
- Fork pockets for easy relocation
- Shock absorber style dampener for smooth gradual raising and lowering without overshoot or bounce
- Wide base for exceptional free standing stability
| Model | Capacity | Turntable | Lowered Height | Raised Height | Power | Approx. Shipping Weight |
| SW-PPA2-24 | 2,000 lbs | 43 5/8 dia. | 9.5″ | 33.5″ | 80 PSI / 15 CFM | 640 lbs |
| SW-PPA4-24 | 4,000 lbs | 43 5/8 dia. | 9.5″ | 33.5″ | 80 PSI / 15 CFM | 760 lbs |
PalletPal Roll-On Level Loader
With internal hydraulic power, PalletPal Roll-On Level Loaders lower to floor height so pallets can be rolled on and off with a hand pallet truck. The lift is then easily adjusted by pushbutton or foot switch control to maintain an ideal height for manual loading and unloading. The narrow side and back panels allow for easy reach over for 4 side access.
- Photo-eye provides toe protection
- Platform locks in partially up position to allow relocation by means of a hand pallet truck
- Availabe One-Touch Auto Leveling provides up or down adjustment by a preset increment at the touch of a button
| Model | Capacity | Platform Size | Lowered Height | Raised Height |
| SW-RollC25-28 | 2,500 lbs | 40″ x 48″ | 3/8″ | 28 3/8″ |
| SW-RollC25-28 | 2,500 lbs | 44″ x 48″ | 3/8″ | 28 3/8″ |
| SW-RollC25-28 | 2,500 lbs | 52″ x 48″ | 3/8″ | 28 3/8″ |
| SW-RollC4-28 | 4,000 lbs | 44″ x 48″ | 3/8″ | 28 3/8″ |
| SW-RollC4-28 | 4,000 lbs | 52″ x 48″ | 3/8″ | 28 3/8″ |
PalletPal Roll-On Level Loader with Turntable
We’ve taken the proven Roll-On design and added a full turntable for even more operator convenience. These units lower to floor height so pallets can be rolled on and off with a hand pallet truck. The lift is then easily adjusted by pushbutton or foot switch control to maintain an ideal height for manual loading and unloading. The narrow side and back panels allow for easy reach over for 4 side access.
- Photo-eye provides toe protection
- Platform locks in partially up position to allow relocation by means of a hand pallet truck
- Availabe One-Touch Auto Leveling provides up or down adjustment by a preset increment at the touch of a button
| Model | Capacity | Platform Size | Lowered Height | Raised Height |
| SW-RollC3-28S | 2,500 lbs | 44″ x 48″ | 2″ | 30″ |
Recent Comments